Programming Control
How to Program Cycle Modifier Heavy
Price
"CnP2!J
lIDs price setting will
be
added to the current vend
price. For example,
if
the vend price is $1.00 and
Cycle Modifier Heavy Price is set to .25, the total vend
price when the Heavy Soil Level is chosen will
be
$1.25.
1.
Press the DELICATESIBULKY
CA)
or
the
COLD
(v)
keypad to scroll through the
programmable Cycle Modifier options until
"CnP2"
appears in the display.
2. When
"CnP2"
appears in the display, press the
START (enter) keypad. There are five digits in
the Cycle Modifier Heavy Price. The fifth digit
will appear in the display and will flash for one
second on, one second off. Refer to
Figure 25.
NOTE:
If
the
vend
price
is $100.00
or
more,
the
fifth digit is "1-6".
If
the
vend
price
is
$99.99
or
less,
the
fifth
digit
is
"0".
CHM507R
Figure 25
3. Press the DELICATESIBULKY
(A)
or
the
COLD
(v)
keypad to increase
or
decrease the
value
of
the fifth digit.
NOTE:
The
vend
price
can
be
set
from
0 to 65,535.
The
factory
default
setting is 50.
4. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE:
To go
back
to
the
current
programmable
option without changing
the
value, press
the
WARM
«)
keypad.
5. Press the DELICATESIBULKY
(A)
or
the
COLD
(v)
keypad to increase
or
decrease the
value
of
the active digit and the START (enter)
keypad to enter the value
of
the digit and advance
to the next digit.
6.
Press the START (enter) keypad with the last
active digit. The next Cycle Modifier option,
"CnP3",
will appear
in
the display.
NOTE:
To
program
"CnP3"
(Cycle
Modifier
Medium
Option), continue to
next
Cycle Modifier
option. To
program
other
options,
press
the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How to Exit Programming Feature
Press the
WARM
«)
keypad until the control returns
to Ready Mode.
72
© Published by
permiSSion
of the copyright owner -
DO
NOT COPY or TRANSMIT
802952
To Next Page
Loading...
