Programming Control
28.
Drop
Off
Mode (On/Off)
"droP"
This option allows the owner to limit machine use to
an attendant without requiring vend.
How to Program the Drop
Off
Mode (Onl
Off)
1.
Control must
be
in
Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATESIBULKY (1\)
or
the
COLD
(v)
keypad until "Prog" appears
in
the
display. Press
the
START (enter) keypad and
"AtS1 " will appear in the display.
3. Press the DELICATESIBULKY (1\)
or
the
COLD
(v)
keypad to scroll thi:ough the
programmable options until "droP" appears in
the display.
4. When "droP" appears in the display, press the
START (enter) keypad. The current Drop
Off
Mode
(On/Oft) Status will appear
in
the display.
"on"
=Option Enabled
"oFF" = Option Disabled
(factory default setting)
When the Drop
Off
Mode
is enabled, starting the
machine requires the correct sequence
of
four keypad
presses.
The
default sequence programmed at the
factory is NORMAL,
PERM
PRESS, DELICATES/
BULKY, SOIL LEVEL.
5. Press the DELICATESIBULKY (1\)
or
the
COLD
(v)
keypad
to
change
the
current status.
6. Press the START (enter) keypad when
the
desired status appears in
the
display.
The
next
option, "LPSA", will appear
in
the display.
NOTE:
To
program "LPSA" (Low Power/Auto
Shutdown A Days Enable), refer to
option 29.
To
program other options, refer to the appropriate
section.
How
to
Exit Programming Feature
Press
the
WARM
«)
keypad until the control returns
to Ready Mode.
29.
Low
Power/Auto Shutdown A
Days Enable
"LPSA"
This option allows the owner to set
Low
Power/Auto
Shutdown
on
certain day(s)
ofthe
week.
Low
Power
or
Auto Shutdown duration are programmed using
an
external device
or
network.
How
to
Program the
Low
PowerlAuto
Shutdown A Days Enable
1.
Control must
be
in
Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATESIBULKY
(1\)
or
the
COLD
(v)
keypad until "Prog" appears
in
the
display. Press the START (enter) keypad and
"AtS
1"
will appear
in
the display.
3.
Press the DELICATESIBULKY (1\)
or
the
COLD
(v)
keypad to scroll through the
programmable options until "LPSA" appears
in
the display.
4. When "LPSA" appears
in
the
display, press
the
START (enter) keypad.
The
current
Low
Power/
Auto Shutdown A Days Enable status will appear
in
the display.
"on"
= Option Enabled
"oFF" = Option Disabled
(factory default setting)
5. Press the DELICATESIBULKY (1\)
or
the
COLD
(v)
keypad
to
change the current status.
6. Press
the
START (enter) keypad when the correct
status appears
in
the display.
The
next option,
"LPSb", will appear
in
the display.
NOTE:
To
program "LPSb" (Low Power/Auto
Shutdown B Days Enable), refer
to option 30.
To
program other options, refer to the appropriate
section.
How
to
Exit Programming Feature
Press
the
WARM
«)
keypad until the control returns
to Ready Mode.
78
©
Published
by
permission of
the
copyright owner -
DO
NOT
COPY
or
TRANSMIT
802952
To Next Page
Loading...
