Testing Machine and Electronic Control Functions
Production Test Cycle
To Exit Production Test Cycle
To
exit a test step, press START (enter) unless
To
Enter Production Test Cycle
otherwise noted in
Table
18.
1. Be certain control is in Ready Mode and access
panel or coin vault is open.
2. While pressing and holding the
DELICATESI
BULKY keypad with one hand, press the HOT
keypad with the other hand.
3. When the control enters the Production Test
Cycle, it will first display
"8
XX" with the "XX"
showing the software version
of
the control.
4. The control will advance through the sequence
of
test steps whenever START (enter) is pressed,
with the exception
of
the Keypad Test. Refer to
Table
18 for all tests in the Production Test
Cycle.
92
© Published
by
permission
of
the copyright owner - DO
NOT
COPY
or
TRANSMIT
802952
To Next Page
Loading...
