Communications Mode
Infra-red Communications
The Infra-red Communications feature allows the
washer control to communicate with an external
device. The washer control can
be
programmed and
have its data read without using the keypad.
It
may
also
be
used to start and stop various diagnostic tests.
How
to
Begin Communications with An
External Device
The control will go blank and the display will show
"-C-"
until the communication is complete.
If
an
error
occurs that terminates communication, the display will
show
"EIXX" ("XX" represents the error code).
NOTE: The Infra-red Communications option
must be turned on. Refer to
option
34
in
Programming Control.
Card Reader Communications
(Card Models Only)
The
Card Reader Communications feature allows the
washer control to communicate with the card reader.
The
washer control can be programmed for a limited
number
of
options and have its data read without using
the keypad.
Network Communications
The Network Communications feature allows the
washer control to communicate with a network. The
washer control can be programmed and have its data
read without using the keypad.
100
@ Published by permission of
the
copyright owner -
DO
NOT
COPY
or TRANSMIT
802952
To Next Page
Loading...
