How
to
Program Special Vend A Start
Hour "SA02"
This option allows the owner to set the hour that
Special Vend A will begin.
1.
Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA02" appears in the display.
2. When
"SA02" appears
in
the
display, press the
START (enter) keypad. The current start hour (in
military time) will appear in the display.
NOTE: The hours
will
be
displayed in military
time.
3. Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to increase or decrease
the start hour to the desired hour.
NOTE: The value can be set from 0-23. The default
value
is
O.
4. Press the START (enter) keypad when the correct
hour appears in the display. The new value is saved
and the next
Special Vend A option,
"SA03", will
appear
in
the display.
NOTE:
To
program
"SA03"
(Special Vend A
Start
Minute), continue to next Special Vend A option. To
program
other
options, press the MED
TEMP
«)
keypad and refer to the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
Programming Control
How
to
Program Special Vend A Start
Minute "SA03"
This option allows the owner to set the minute that
Special Vend A will begin.
1.
Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to scroll through
the
programmable Special Vend A options until
"SA03" appears
in
the display.
2. When
"SA03" appears in the display, press the
START (enter) keypad.
The
current start minute
will appear
in the display.
3. Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to increase
or
decrease
the
start minute to the desired minute.
NOTE: The value
can
be set from 0-59 minutes.
The default value is
O.
4. Press the START (enter) keypad when the correct
minute appears in the display. The new value is
saved and the next Special Vend A option,
"SA04", will appear in the display.
NOTE:
To
program
"SA04"
(Special Vend A
Length
in
Hours), continue to next Special Vend A
option.
To
program
other
options, press the MED
TEMP
«)
keypad
and
refer to the appropriate
section.
How
to
Exit Programming Feature
Press the MED TEMP «) keypad until the control
returns to Ready Mode.
513001
@ Published
by
permission
of
the copyright owner - DO NOT COPY
or
TRANSMIT
47
To Next Page
Loading...
