Programming Control
How
to
Program Special Vend A Length in
Hours "SA04"
This option allows the owner to set the length in hours
for Special Vend
A.
1.
Press the LOW TEMP (A)
or
the
DELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA04" appears in the display.
2. When
"SA04" appears in the display, press the
START (enter) keypad.
The
current length in
hours will appear in the display.
3.
Press the LOW TEMP (A) or the
DELICATES
(v)
keypad to increase or decrease
the current length
of
hours to the desired number
of
hours.
NOTE: The value can be set from 0-24. The default
value
is
O.
4. Press the START (enter) keypad when the correct
hour appears in the display. The new value is saved
and the next Special Vend A option,
"SAOS", will
appear in the display.
NOTE:
To
program
"SA~S"
(Special Vend A
Start
Month), continue to next Special Vend A option.
To
program
other options, press the
MED
TEMP
«)
keypad
and
refer to the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP «) keypad until the control
returns to Ready Mode.
How
to
Program Special Vend A Start
Month
"SA~S"
This option allows the owner to set the month that
Special Vend A will begin.
NOTE:
If
Special Vend A
Start
Month,
Start
Date,
End
Month,
or
End
Date
are
programmed to zero
(default
is
zero), the Special Vend A will be active
every week on the days programmed
in
Table 12.
1.
Press the LOW TEMP (A) or the
DELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SAOS" appears in the display.
2.
When
"SAOS"
appears in the display, press the
START (enter) keypad. The current start month
will appear in the display.
3. Press the LOW TEMP
(A) or the
DELICATES
(v)
keypad to increase or decrease
the start month to the desired month.
If
"0"
is selected and Special Vend A is on,
Special Vend A will occur at the time and days
of
week selected, regardless
of
the month.
NOTE: The value can be set
at
0 (off)
or
from 1-12.
The default value is
O.
4. Press the START (enter) keypad when the correct
month appears in the display. The new value is
saved and the next
Special Vend A option,
"SA06", will appear in the display.
NOTE:
To
program
"SA06" (Special Vend A Start
Date), continue to next Special Vend A option.
To
program
other
options, press the MED
TEMP
«)
keypad and refer to the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
48
@)
Published by pennission
of
the copyright owner - DO NOT
COpy
or
TRANSMIT
513001
To Next Page
Loading...
