How
to
Program Special Vend A No Heat
Price "SA12"
This option allows the owner to set the vend price for a
no
heat cycle in Special Vend A.
1.
Press the LOW TEMP
(1\)
or the
nELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA
12"
appears in the display.
2. When "SA
12"
appears in the display, press the
START (enter) keypad. There are five digits in
the Special Vend A
No
Heat Price.
The
fifth digit
will appear in the display and will flash one
second on and one second off. Refer to Figure
9.
NOTE:
If
the
vend
price
is $100.00
or
more,
the
fifth
digit
is
"1-6".
If
the
vend
price
is $99.99
or
less,
the
fifth
digit
is
"0".
I
CHM507R
Figure 9
3. Press the
LOW
TEMP
(1\)
or
the
nELICATES
(v)
keypad to increase
or
decrease
the value
of
the
fifth
digit.
NOTE:
The
vend
price
can
be
set
from
0
to
65,535.
The
default
value
is
O.
4. Press the START (enter) keypad to enter the fifth
digit
and
display remaining four digits.
The
active digit will flash one second on and one
second off.
Programming Control
NOTE:
To go
back
to
the
current
programmable
Special Vend A
option
without
changing
the
value,
press
the
MED
TEMP
«)
keypad.
5. Press the LOW TEMP
(1\)
or
the
nELICATES
(v)
keypad to increase or decrease
the value
of
the active digit and the START
keypad to enter the value
of
the digit and advance
to the next digit.
6.
Press the START (enter) keypad with the last
active digit. The new value is saved and the next
Special Vend A option, "SA
13",
will appear in
the display.
NOTE:
To
program
"SA13" (Special Vend A
Heat
Time
Minutes),
continue
to
next
Special Vend A
option.
To
program
other
options,
press
the
MED
TEMP
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the
MEn
TEMP
«)
keypad until the control
returns to Ready Mode.
513001
© Published by permission of
the
copyright owner - DO NOT
COpy
or TRANSMIT
53
To Next Page
Loading...
