Programming Control
How
to
Program Special Vend A Heat Time How
to
Program Special Vend A
No
Heat
Minutes
"SA13"
This option allows the owner to set the amount
of
time
in minutes for a heat cycle
in
Special Vend A.
1.
Press the
LOW
TEMP (A)
or
the
DELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA
13"
appears in the display.
2. When
"SA
13"
appears
in
the display, press the
START (enter) keypad.
The
current number
of
minutes set for Special Vend A Heat Time
Minutes will appear in the display.
3. Press the
LOW
TEMP
(A)
or
the
DELICATES
(v)
keypad to increase
or
decrease
the current number
of
minutes displayed to the
desired number
of
minutes.
NOTE:
The
number
of
minutes
can
be
set
from
1
to
99
minutes.
The
control
will
not
allow
the
cycle
time
to
exceed
99
minutes.
The
default
value
is 1.
4. Press the START (enter) keypad
when
the correct
number
of
minutes is displayed.
The
new
value is
saved and the next Special Vend A option
"SA
14",
will appear in the display.
NOTE:
To
program
"SA14" (Special
Vend
A
No
Heat
Time
Minutes),
continue
to
next
Special
Vend
A
option.
To
program
other
options,
press
the
MED
TEMP
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the
MED
TEMP
«)
keypad until the control
returns to Ready Mode.
Time Minutes "SA14"
This option allows the owner to set the amount
of
time
in
minutes for a no heat cycle in Special Vend A.
1.
Press the
LOW
TEMP
(A)
or
the
DELICATES
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA
14"
appears in the display.
2.
When
"SA
14"
appears
in
the display, press the
START (enter) keypad.
The
current number
of
minutes set for Special Vend A
No
Heat Time
Minutes will appear in the display.
3. Press the
LOW
TEMP
(A)
or
the
DELICATES
(v)
keypad to increase
or
decrease
the current number
of
minutes displayed to the
desired number
of
minutes.
NOTE:
The
number
of
minutes
can
be
set
from
1
to
99
minutes.
The
control
will
not
allow
the
cycle
time
to
exceed 99
minutes.
The
default
value
is
1.
4. Press the START (enter) keypad
when
the correct
number
of
minutes is displayed.
The
new
value is
saved and the next Special Vend A option
"SA
15",
will appear in
the
display.
NOTE:
To
program
"SA15" (Special
Vend
A
Coin
#1
Top-Off
Time
Minutes),
continue
to
next
Special
Vend
A
option.
To
program
other
options,
press
the
MED
TEMP
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the
MED
TEMP
«)
keypad
until the control
returns to Ready Mode.
54
© Published
by
permission
of
the
copyright owner -
DO
NOT
COPY
or
TRANSMIT
513001
To Next Page
Loading...
