Testing Machine and Electronic Control Functions
Dryer-on
Temperature
Test
This option tests the temperature inside the cylinder
while running a cycle.
To
start test, control must
be
in the Testing Mode.
Refer to
"How
to
Enter
Testing
Feature"
at
the
beginning
of
this section.
To enter, press the START (enter) keypad.
The
display
will show "F---" for degrees in Fahrenheit or
"C---"
for degrees in Celsius.
The
"---" will show the degrees.
To exit
the
test, press the MED TEMP
«)
keypad.
The
control will then return to the testing mode.
513001
© Published
by
permission
of
the copyright owner - DO
NOT
COPY
or
TRANSMIT
69
To Next Page
Loading...
