Control Identification
Select Cycle Pads
(Refer to
Figure
1)
SELECT CYCLE pads are used to select the specific
washer cycle. These pads include NORMAL, PERM
PRESS, and DELICATESIBULKY. These pads allow
the user to select a cycle other than the default cycle
(PERM
PRESS). The SELECT CYCLE keypads are
not active after the first fill step
of
the cycle. The
selected cycle is indicated
by
the light (LED) on the
pad. Pressing the flashing START pad will confirm the
selection and the cycle will begin. When the card
reader is used, pressing the START
pad
will start the
cycle and deduct the vend price from the card.
Select Wash Temp Pads
(Refer to
Figure 1)
SELECT WASH TEMP pads are used to select the
temperature
of
the water used for the wash fill. These
pads include HOT, WARM, and COLD. These pads
allow the user to select a water temperature other than
the default setting (WARM). The
SELECT WASH
TEMP pads are active only during the first fill step
of
the cycle. The selected temperature is indicated
by
the
light (LED) on the pad.
Both the SELECT
WASH TEMP pads and the SELECT
CYCLE pads are used in various combinations for
programming cycles, retrieving audit information,
running diagnostic tests, and other operations. These
instructions cover the manual programming and data
retrieval options.
Soil Level Pad
(Refer to
Figure
1)
The SOIL LEVEL pad is used to select cycle modifier
options. The LIGHT option is the default and indicates
no cycle modifiers are active. The MEDIUM and
HEAVY options can
be
programmed to offer extra
features for an added vend price. Features available
include an added prewash, extra wash time, an added
extra rinse, and a warm rinse temperature.
F or details
on
programming the Soil Level option,
refer to
Programming Control.
Electronic Control
~~1r--_4
~~H-1--5
2
o
~
WASH
COINSJCA/lD
FLW16R
1 LED Light
2 SELECT CYCLE pads (top row)
3 Four 7 -Segment Digits
4 Display
5 LED Status Lights
6 SOIL LEVEL
pad
7 START
pad
8 SELECT
WASH
TEMP pads (bottom row)
Figure 1
6
© Published by permission
of
the copyright owner - DO NOT COPY
or
TRANSMIT
802952
To Next Page
Loading...
