EasyManua.ls Logo

Alliance Laundry Systems FLW1526C - Page 77

Alliance Laundry Systems FLW1526C
255 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20.
Vend Price #9
"AtS9"
This option allows the owner to set the vend price for a
delicate!cold wash. This vend price will be shown in
the display when
DELICATESIBULKY and COLD
are selected.
How
to
Program the Vend Price #9
1.
Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATESIBULKY (A) or the
COLD
(v)
keypad until
"Prog"
appears in the
display. Press the START (enter) keypad and
"AtS1" will appear in the display.
3. Press the DELICATESIBULKY
(A)
or the
COLD
(v)
keypad to scroll through the
programmable options until
"AtS9" appears in
the display.
The
DELICATESIBULKY and
COLD LEDs will
be
lit to show which cycle!
temperature price is being programmed.
4. When
"AtS9" appears in the display, press the
START (enter) keypad. There
are
five digits in
the Vend Price #9.
The
fifth digit will appear in
the display and will flash one second on, one
second off. Refer to
Figure 14.
NOTE:
If
the vend price is $100.00
or
more, the
fifth digit is
"1-6".
If
the vend price is $99.99
or
less,
the
fifth digit is
"0".
"",,·,·,·,·,·,
,
..
-.'
)-
-0
B
Programming Control
NOTE: The vend price can be set from 0 to 65,535.
The
factory default setting is 200.
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE:
To
go
back to the
current
programmable
option without changing the value, press the
WARM
«)
keypad.
7. Press theDELICATESIBULKY (A)
or
the
COLD
(v)
keypad to increase
or
decrease the
value
of
the active digit and the START (enter)
keypad to enter the value
of
the digit and advance
to the next digit.
8.
Press the START (enter) keypad with the last
active digit.
The
next option, "rtC-", will appear
in the display.
NOTE:
To
program "rtC-" (Real Time Clock),
refer to
option 21.
To
program other options, refer
to the appropriate section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
CHM507R
Figure 14
5. Press the DELICATESIBULKY (A)
or
the
COLD
(v)
keypad to increase
or
decrease the
value
of
the fifth digit.
802952 @ Published by permission
of
the copyright owner - DO NOT COPY
or
TRANSMIT
47

Table of Contents

Related product manuals