Programming Control
19. Vend Price
#8
"AtS8"
This option allows the owner
to
set the vend price for a
delicate!wann wash. This vend price will
be
shown in
the display when DELICATESIBULKY and WARM
are selected.
How
to Program the Vend Price
#8
1.
Control must
be
in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATESIBULKY
(1\)
or
the
COLD
(v)
keypad until "Prog" appears in the
display. Press the START (enter) keypad and
"AtS1" will appear in the display.
3. Press the DELICATESIBULKY
(1\)
or
the
COLD
(v)
keypad to scroll through the
programmable options until
"AtS8" appears in
the display.
The
DELICATESIBULKY and
WARM LEDs will
be
lit to show which cycle!
temperature price is being programmed.
4. When
"AtS8" appears in the display, press the
START (enter) keypad. There are five digits in
the Vend Price #8.
The
fifth digit will appear in
the display and will flash one second on, one
second off. Refer to
Figure
13.
NOTE:
If
the vend price is $100.00
or
more, the
fifth digit is
"1-6".
If
the vend price is $99.99
or
less,
the
fifth digit is
"0".
CHM507R
Figure
13
5. Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to increase
or
decrease the
value
of
the fifth digit.
NOTE:
The
vend price
can
be
set from 0 to 65,535.
The
factory default setting is 200.
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE:
To
go
back
to the
current
programmable
option without changing
the
value, press
the
WARM
«)
keypad.
7. Press the DELICATESIBULKY
(1\)
or
the
COLD
(v)
keypad to increase
or
decrease the
value
ofthe
active digit and the START (enter)
keypad to enter the value
of
the digit and advance
to the next digit.
8. Press the START (enter) keypad with the last
active digit. The next option,
"AtS9", will appear
in the display.
NOTE:
To
program
"AtS9"
(Vend Price #9), refer
to
option 20. To
program
other
options, refer to
the
appropriate
section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to
Ready Mode.
46
© Published
by
permission of the copyright owner - DO NOT COPY
or
TRANSMIT
802952
To Next Page
Loading...
