18.
Vend Price #7
"AtS7"
This option allows the owner to set the vend price for a
de1icatelhot wash. This vend price will
be
shown in the
display when DELICATESIBULKY and HOT are
selected.
How
to
Program the Vend Price
#7
1.
Control must
be
in Manual Mode. Refer to
Entering the
Manual
Mode.
2. Press the DELICATESIBULKY (/\)
or
the
COLD
(v)
keypad until
"Prog"
appears in the
display. Press the START (enter) keypad and
.oAtS
1"
will appear in the display.
3. Press the DELICATESIBULKY (/\)
or
the
COLD
(v)
keypad to scroll through the
programmable options until
"AtS7" appears in
the display. The DELICATESIBULKY and HOT
LEDs will
be
lit to show which cycle/temperature
price is being programmed.
4. When
"AtS7" appears in the display, press the
START (enter) keypad. There are five digits
in
the Vend Price #7.
The
fifth digit will appear in
the display and will flash one second on, one
second off. Refer to
Figure 12.
NOTE:
If
the vend price is $100.00
or
more, the
fifth digit is "1-6".
Ifthe
vend price is $99.99
or
less,
the
fifth digit is
"0".
B
CHM507R
Figure 12
5. Press the DELICATESIBULKY (/\)
or
the
COLD
(v)
keypad to increase
or
decrease the
value
of
the fifth digit.
Programming Control
NOTE: The vend price can be set from 0 to 65,535.
The
factory default setting is 200.
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits.
The
active digit will flash one second on and one
second off.
NOTE:
To
go
back
to the
current
programmable
option without changing the value, press the
WARM
«)
keypad.
7. Press the DELICATESIBULKY (/\)
or
the
COLD
(v)
keypad to increase or decrease the
value
of
the active digit and the START (enter)
keypad to enter the value
of
the digit and advance
to the next digit.
8. Press the START (enter) keypad with the last
active digit.
The
next option, "AtS8", will appear
in the display.
NOTE:
To
program
"AtS8"
(Vend Price #8), refer
to
option 19.
To
program
other
options, refer to the
appropriate section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
802952
© Published by permission
of
the copyright owner - DO NOT
COpy
or
TRANSMIT
45
To Next Page
Loading...
