How to Program Special Vend A Length in
Hours "SA04"
This option allows the owner to set the length in hours
for Special Vend
A.
1.
Press the DELICATES/BULKY (!\)
or
the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA04"
appears in the display.
2. When
"SA04"
appears
in
the display, press the
START (enter) keypad. The current length
in
hours will appear
in
the display.
3. Press the DELICATESIBULKY (!\)
or
the
COLD
(v)
keypad to increase
or
decrease the
current length
of
hours to the desired number
of
hours.
4. Press the START (enter) keypad when the correct
hour appears
in the display. The next Special Vend
A option, "SAOS", will appear in the display.
NOTE:
To
program
"SA05" (Special Vend A
Start
Month),
continue
to
next
Special Vend A
option.
To
program
other
options,
press
the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
Programming Control
How
to
Program Special Vend A Start
Month
"SA~S"
This option allows the owner to set the month that
Special Vend A will begin.
NOTE:
If
Special Vend A
Start
Month,
Start
Date,
End
Month,
or
End
Date
are
programmed
to
zero
(default is zero),
the
Special Vend A will
be
active
every
week
on
the
days
programmed
in
Table 10.
1.
Press the DELICATESIBULKY (!\)
or
the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SAOS" appears in the display.
2. When "SAOS" appears in the display, press the
START (enter) keypad. The current start month
will appear
in the display.
3. Press the DELICATESIBULKY
(!\) or the
COLD
(v)
keypad to increase
or
decrease the
start month to the desired month.
If
"0"
is selected and Special Vend A is on,
Special Vend A will occur at the time and days
of
week selected, regardless
of
the month.
4. Press the START (enter) keypad when the correct
month appears
in the display.
The
next Special
Vend A option,
"SA06",
will appear in the
display.
NOTE:
To
program
"SA06" (Special Vend A
Start
Date),
continue
to
next
Special Vend A option. To
program
other
options, press
the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
802952
© Published by permission
of
the copyright owner - DO
NOT
COPY
or
TRANSMIT
55
To Next Page
Loading...
