Programming Control
How
to Program Special Vend A Start Date
"SA06"
This option allows the owner to set the date that
Special Vend A will begin.
L Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA06" appears in the display.
2. When
"SA06" appears in the display, press the
START (enter) keypad. The current start date will
appear in the display.
3.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to increase
or
decrease the
start date to the desired date.
If
"0"
is selected and Special Vend A is on,
Special Vend A will occur at the time and days
of
week selected, regardless
of
the date.
4. Press the START (enter) keypad when the correct
date appears in the display. The next Special Vend
A option,
"SA07", will appear in the display.
NOTE:
To
program
"SA07" (Special Vend A
Start
Year), continue
to
next
Special Vend A option.
To
program
other
options,
press
the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
How
to
Program Special Vend A Start Year
"SA07"
This option allows the owner to set the year that
Special Vend A will begin.
L Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA07" appears in the display.
2. When
"SA07" appears in the display, press the
START (enter) keypad. The current start year
will appear in the display.
3.
Press the DELICATESIBULKY
(1\)
or
the
COLD
(v)
keypad to increase
or
decrease the
start year to the desired year.
If
"0"
is selected and Special Vend A is on,
Special Vend A will occur at the time
or
days
of
week selected, regardless
of
the year.
"1"
is year
200
I,
"2"
is year 2002, and so on.
4. Press the START (enter) keypad when the correct
year appears in the display. The next Special Vend
A option,
"SA08", will appear in the display.
NOTE:
To
program
"SAOS" (Special Vend A
End
Month), continue to
next
Special Vend A option.
To
program
other
options,
press
the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
56
@ Published
by
permission
of
the copyright owner - DO NOT
COPY
or
TRANSMIT
802952
To Next Page
Loading...
