Programming Control
How
to
Program Special Vend A End
Month "SA08"
This option allows the owner to set the month that
Special Vend A will end.
1.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA08" appears in the display.
2. When
"SA08" appears in the display, press the
START (enter) keypad.
The
current
end
month
will appear
in
the display.
3. Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to increase
or
decrease the end
month to the desired month.
If"O"
is selected and Special Vend A is on,
Special Vend A will occur
at
the time and day
of
week selected, regardless
of
the month.
4. Press the START (enter) keypad when the correct
month appears in the display. The next Special
Vend A option,
"SA09", will appear in the
display.
NOTE:
To
program "SA09" (Special Vend A
End
Date), continue to next Special Vend A option.
To
program other options, press the WARM
«)
keypad
and
refer to the appropriate section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
How
to
Program Special Vend A End Date
"SA09"
This option allows the owner to set the date that
Special Vend A will end.
1.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA09" appears in the display.
2. When
"SA09" appears in the display, press the
START (enter) keypad. The current
end
date will
appear in the display.
3.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to increase
or
decrease the end
date to the desired date.
If
"0"
is selected and Special Vend A is on,
Special Vend A will occur
at
the time or days
of
week selected, regardless
of
the date.
4. Press the START (enter) keypad when the correct
date appears in the display. The next Special Vend
A option,
"SA 10", will appear in the display.
NOTE:
To
program "SA10" (Special Vend A
End
Year), continue to next Special Vend A option.
To
program other options, press the WARM
«)
keypad
and
refer to the appropriate section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
802952 © Published
by
permission
of
the copyright owner - DO NOT
COpy
or
TRANSMIT
57
To Next Page
Loading...
