Programming Control
How
to
Program Special Vend A Added
Wash
#4 Fill/Agitate Time
"SA20"
This option allows the owner to add time to the wash
agitate part
of
the cycle in Special Vend A.
1.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA20" appears in the display.
2.
When "SA20" appears
in
the display, press the
START
(enter) keypad.
3.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to increase or decrease the
number
of
minutes displayed to the desired
number
of
added minutes.
NOTE: The Special Vend A
Added
Wash
Agitate
Time
can
be
set from zero
"0"
to
15
minutes.
4. Press the START (enter) keypad when the correct
number
of
minutes appears in the display. The
next Special
Vend
A option, "SA21 ", will appear
in the display.
NOTE:
To
program
"SA21" (Special Vend A
Subtracted
Wash Agitate Time), continue to
next
Special Vend A option. To
program
other
options,
press the
WARM
«)
keypad
and
refer
to
the
appropriate
section.
How
to
Exit
Programming
Feature
Press the
WARM
«)
keypad until the control returns
to Ready Mode.
How
to
Program Special Vend A
Subtracted Wash #4 Fill/Agitate Time
"SA21"
This option allows the owner to subtract time from the
wash agitate part
of
the cycle in Special Vend A.
1.
Press the DELICATESIBULKY
(1\)
or the
COLD
(v)
keypad to scroll through the
programmable Special Vend A options until
"SA21" appears in the display.
2. When
"SA21 " appears in the display, press the
START (enter) keypad.
3.
Press the DELICATESIBULKY (I\) or the
COLD (v) keypad to increase
or
decrease the
number
of
minutes displayed to the desired
number
of
subtracted minutes.
NOTE:
The
Special Vend A
Subtracted
Wash
Agitate
Time
can
be
set from zero
"0"
to 15
minutes.
4. Press the START ( enter) keypad when the correct
number
of
minutes appears in the display. The
next Special Vend A option,
"SA01", will appear
in the display.
NOTE:
To
program
"SPb-" (Special Vend B
Enable), press
the
WARM
«)
keypad
and
refer
to
option
23.
To
program
other
options
refer
to
the
appropriate
section.
How
to
Exit
Programming
Feature
Press the
WARM
«)
keypad until the control returns
to Ready Mode.
68
© Published
by
permission
of
the copyright owner - DO
NOT
COPY
or
TRANSMIT
802952
To Next Page
Loading...
