23.
Special Vend B Days Enable
"SPb-"
This option allows the owner to enable
or
disable a
second special vend.
Special Vend B can
be
programmed using an external
device or network.
The
owner may also tum the Special Vend B option on
or
off
if
desired.
How
to
Program Special Vend B Days
Enable
1.
Control must
be
in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATESIBULKY
0)
or
the
COLD
(v) keypad until "Prog" appears in the
display. Press the START (enter) keypad and
"AtS1" will appear in the display.
3. Press the DELICATESIBULKY
(I\) or the
COLD
(v)
keypad to scroll through the
programmable options until
"SPb-" appears in
the display.
4. When
"SPb-" appears in the display, press the
START (enter) keypad.
The
current Special Vend
B Days Enable status will appear in the display.
"on"
=Option Enabled
"oFF"
=Option Disabled
(factory default setting)
5. Press the DELICATESIBULKY
(1\)
or
the
COLD
(v)
keypad to change the current status.
6. Press the START (enter) keypad when the correct
status appears in the display. The next option,
"SPC-", will appear in the display.
NOTE: To
program
"SPC-" (Special Vend C Days
Enable), refer to option 24.
To
program
other
options, refer to the appropriate section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
Programming Control
24. Special Vend C Days Enable
"SPC-"
This option allows the owner to enable
or
disable third
special vend.
Special Vend C can
be
programmed using an external
device
or
network.
The
owner may also
tum
the Special Vend C option on
or
off
if
desired.
How
to
Program Special Vend C Days
Enable
1.
Control must
be
in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATESIBULKY (1\) or the
COLD
(v)
keypad until "Prog" appears in the
display. Press the START (enter) keypad and
"AtS1" will appear in the display.
3. Press the DELICATESIBULKY
(I\) or the
COLD
(v)
keypad to scroll through the
programmable options until
"SPC-" appears in
the display.
4. When
"SPC-" appears in the display, press the
START (enter) keypad.
The
current Special Vend
C Days Enable status will appear in the display.
"on"
=Option Enabled
"oFF"
Option Disabled
(factory default setting)
5. Press the
DELICATESIBULKY
(1\)
or
the
COLD
(v)
keypad to change the current status.
6. Press the START (enter) keypad when the correct
status appears in the display.
The
next option,
"SPd-", will appear
in
the display.
NOTE: To
program
"SPd-" (Special Vend D Days
Enable),
refer
to option 25. To
program
other
options,
refer
to the
appropriate
section.
How
to
Exit Programming Feature
Press the WARM
«)
keypad until the control returns
to Ready Mode.
802952
@ Published by permission
of
the copyright owner - DO NOT COPY
or
TRANSMIT
69
To Next Page
Loading...
