Coupling and uncoupling the implement
106
Condor 12001-C/15001-C BAH0030-4 07.15
12. Uncouple all supply lines from the tractor.
13. Close the hydraulic connectors with
protective caps.
14. Place the supply lines in the hose cabinet
(Fig. 111).
Fig. 111
15. Set the implement down on the stand.
16. Apply the parking brake
Fig. 112
WARNING
Set the implement down on a
horizontal, firm base only!
Ensure that the jack does not sink
into the ground. If the jack sinks
into the ground, it will be
impossible to couple the
implement again!
17. Open the securing device (Fig. 113) of the
tractor's lower link (see tractor operating
manual).
18. Uncouple the tractor's lower link.
19. Pull the tractor forwards.
Fig. 113
DANGER
While pulling the tractor forwards
no personnel are allowed to be
between the tractor and the
implement!
CAUTION
Danger of getting crushed in the area of the moving draw rail.