Amazone Precea 3000 User Manual

6.4.13.5 Adjusting the coulter pressure hydraulically
The coulter pressure is applied with a hydraulic
cylinder
1
.
CMS-I-00003953
The hydraulic coulter pressure system can be
equipped with contact force regulation. The force
sensors
1
determine the contact force of the
coulters. The signal processing
2
calculates an
average value for all coulters and regulates the
pressure in the hydraulic coulter pressure system.
NOTE
The adjustment of the coulter pressure must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
CMS-I-00003921
1. Switch on the fan
NOTE
The working range is between 5 and 100 bar.
2. To increase the coulter pressure for heavy soils
+
or to decrease it for light soils
-
,
refer to the ISOBUS operating manual "Adjusting
the coulter pressure".
3. To check the setting after driving a short
distance,
see "Checking the placement depth".
1
+
-
CMS-I-00005409
CMS-T-00005524-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
119

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English