NOTE
Position
is only needed for parking the
implement.
The setting lever
can also be engaged in half-
steps
in the grid.
1. Raise the implement.
2. Secure the tractor and implement.
3. Unlock the setting lever.
NOTE
Beyond depth positions F-G, the contact force
regulation is without function.
4.
To use the coulter pressure control,
see "Configuring the coulter pressure monitoring"
in the ISOBUS operating manual.
5.
To increase the seed placement depth,
move the setting lever towards
or
To reduce the seed placement depth,
move the setting lever towards
.
6. Lock the setting lever in the grid.
7.
After driving a short distance, check the
adjustment of the seed placement depth,
see "Checking the seed placement depth".
CMS-I-00001919
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
118
To Next Page
Loading...
