6.4.15.2 Determining the maximum fertiliser spread rate
NOTE
The values in the table serve as a reference and
require a constant power supply of at least 12
volts.
Read the values from the table.
CAN / DAP / NPK / phosphate
Fertiliser
quantity
[kg / ha]
Row spacing [cm]
45.0 50.0 60.0 75.0 80.0
100 15.0 15.0 15.0 15.0 15.0
140 15.0 15.0 15.0 15.0 15.0
180 15.0 15.0 15.0 15.0 15.0
220 15.0 15.0 15.0 15.0 15.0
260 15.0 15.0 15.0 13.5 12.7
300 15.0 15.0 14.7 11.7 11.0
340 15.0 15.0 12.9 10.4 9.7
380 15.0 13.9 11.6 9.3 8.7
420 14.0 12.6 10.5 8.4 7.9
460 12.8 11.5 9.6 7.7 7.2
500 11.7 10.6 8.8 8.0 7.6
540 10.9 9.8 8.1 6.5 6.1
580 10.1 9.1 7.6 6.1 5.7
620 9.5 8.5 7.1 5.7 5.3
660 8.9 8.0 6.7 5.3 5.0
700 8.4 7.5 6.3 5.0 4.7
740 7.9 7.1 5.9 4.8 4.5
780 7.5 6.8 5.6 4.5 4.2
Urea
Fertiliser
quantity
[kg / ha]
Row spacing [cm]
45.0 50.0 60.0 75.0 80.0
100 15.0 15.0 15.0 15.0 15.0
140 15.0 15.0 15.0 15.0 15.0
180 15.0 15.0 15.0 13.4 12.6
220 15.0 15.0 13.8 11.0 10.3
260 15.0 14.0 11.6 9.3 8.7
CMS-T-00002412-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
131