2. Open the locks
.
3. Remove the cover
.
CMS-I-00001909
4. Hook the chute
onto the singling unit.
NOTE
When the collection bucket is hooked onto the
chute, the chute can be loaded with a maximum
of 12 kg.
5. Put the collection bucket
under the chute.
or
Hook the collection bucket
onto the chute.
6. Put the collection bucket
under the chute.
CMS-I-00001997
7. Release the lock
until the points
are
aligned.
CMS-I-00001910
8 | Parking the machine
Emptying the seed hopper through the singling disc
MG6660-EN-II | D.1 | 27.09.2021
169