Amazone Precea 3000 User Manual

8.4 Emptying the fertiliser metering
unit 172
8.5 Emptying the micropellet hopper 173
8.6 Relieving the hole covering rollers 175
8.7 Parking the wheel mark eradicator 176
8.8 Parking the PreTeC coulter 177
8.9 Putting down the jacks 178
8.10 Disconnecting the supply lines
from the hose package 179
8.11 Uncoupling the ISOBUS line 179
8.12 Disconnecting the hydraulic
hose lines 180
8.13 Uncoupling the power supply 181
8.14 Uncoupling the 3-point mounting
frame 181
8.15 Uncoupling the universal joint
shaft 182
8.16 Conserving the drive shaft 182
9
Repairing the machine 183
9.1 Maintaining the machine 183
9.1.1 Maintenance schedule 183
9.1.2 Checking and replacing the cutting
discs on the PreTeC coulter 185
9.1.3 Adjusting the cutting disc distance
on the PreTeC coulter 186
9.1.4 Adjusting the cutting disc drive on
the PreTeC coulter 187
9.1.5 Checking and replacing the closer
discs on the PreTeC coulter 188
9.1.6 Checking and replacing the rigid
cutting disc on the PreTeC coulter 188
9.1.7 Checking and replacing the cutting
disc on the FerTeC Twin coulter 189
9.1.8 Adjusting the cutting disc distance
on the FerTeC Twin coulter 190
9.1.9 Checking and replacing the inner
scraper on the FerTeC Twin coulter 190
9.1.10 Checking the wheel bolt tightening
torque 191
9.1.11 Checking the tightening torque for
the radar sensor bolts 192
9.1.12 Checking the frame connection
tightening torque 192
9.1.13 Checking the coulter connection
tightening torque 193
9.1.14 Checking the running gear
connection tightening torque 193
9.1.15 Checking the tyre inflation pressure 194
9.1.16 Checking the V-ribbed belt 194
9.1.17 Tightening the V-ribbed belt 196
9.1.18 Checking the top link pin and lower
link pin 196
9.1.19 Checking the hydraulic hose lines 197
9.1.20 Cleaning the fan rotor 197
9.1.21 Cleaning the cyclone separator 198
9.1.22 Cleaning the suction basket 199
9.1.23 Cleaning the filling auger 200
9.1.24 Cleaning the fertiliser hopper 201
9.1.25 Cleaning the fertiliser metering unit 203
9.1.26 Cleaning the micropellet metering
unit 204
9.1.27 Adjusting the micropellet metering
unit bottom flap 206
9.1.28 Clean the singling unit 207
9.1.29 Cleaning the opto-sensor 208
9.1.30 Cleaning the distributor head 213
9.1.31 Checking the wheel mark eradicator
coulter 214
9.1.32 Checking the gear oil level 215
9.1.33 Refilling the gear oil 215
9.2 Lubricating the machine 216
9.2.1 Overview of lubrication points 217
9.3 Lubricating the roller chains 218
9.3.1 Lubricating the roller chain in the
leading wheel drive 218
9.3.2 Lubricating the roller chain in the
interchangeable wheel gear 220
9.3.3 Lubricating the roller chain in the
trailing wheel drive 221
9.3.4 Lubricating the roller chain on the
mechanical metering drive 223
9.3.5 Lubricating the roller chain on the
central fertiliser metering drive 224
9.3.6 Lubricating the roller chain on the
electric agitator shaft drive 225
9.4 Eliminating faults 226
TABLE OF CONTENTS
MG6660-EN-II | D.1 | 27.09.2021
III

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English