Amazone Precea 3000 User Manual

6.4.7.2.3 Adjusting the track marker pitch
NOTE
The adjustment of the track marker pitch must
be adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1. Take the ratchet spanner from the thread pack.
2. Loosen the bolts
1
.
3. To put the track marker pitch in the desired
position,
turn the shaft
2
.
4. Tighten the bolts
1
.
5. Put the ratchet spanner back in the threaded
cartridge.
-
+
2 1
CMS-I-00001077
6.4.7.3 Precea 4500
6.4.7.3.1 Actuating the track marker
NOTE
The automatic set changer for implements with
Profi control is only active when the implement
has reached a speed > 2 km/h in working
position.
1. Press the track marker
1
against the rubber
block.
The transport lock is relieved.
2. Swivel back the transport lock
2
.
3. Repeat the procedure for the second transport
lock.
4. Put the "yellow" tractor control unit in float
position.
The track marker is lowered.
1
2
CMS-I-00001906
CMS-T-00001928-B.1
CMS-T-00005434-A.1
CMS-T-00001926-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6660-EN-II | D.1 | 27.09.2021
84

Amazone Precea 3000 Specifications

General

Brand	Amazone
Model	Precea 3000
Category	Farm Equipment
Language	English