Input the email addresses of the people who are required to receive this notification email separated by
semicolons.
Cc:
Input the email addresses of the people who require a copy of this notification email separated by
semicolons.
Bcc:
Input the email addresses of the people who require a blind copy of this notification email separated by
semicolons.
Subject:
Provide a subject heading for the notification email.
NOTE: Email must be globally enabled by ticking Send Emails From Traka32 and entering the SMTP Server
and SMTP Port from Traka 32 Properties. On certain SMTP servers such as Microsoft Exchange, relaying
may have to be enabled in order allow Traka32 to send e-mails to the outside world. For a guide on how to
safely configure Microsoft Exchange for relaying, please refer to the Relaying on Microsoft Exchange
section.
NOTE: When using Email Notification, various response codes are sent and received between Traka32 and
the email server. These codes must match in order for the Email Notifications to work correctly. Refer to
the section Email Response Codes for more information.
Network
If Network is selected...
To:
Provide the windows login user name(s) of the people who are required to receive the Net Send (Windows
Network Messaging Service) Message Notification.
From:
Provide a valid email address. If this is left blank the message may not be processed by the SMTP
Server because it could think it is spam. Most systems require the senders email address to be verified.
NOTE: Consult Messenger on Microsoft Windows for how to configure the service for use with Traka32.
SMS Message
If SMS Message is selected
To:
Input the phone numbers of the people who are required to receive this SMS message separated by
semicolons.
Subject:
Provide a subject heading for the SMS message.
Message Field:
Input the message the recipients of this notification will receive.
NOTE: Please read the section below on SMS Messaging for further details on how it works.
To Next Page
