3.19.22 LOCATION STORING
Location Storing or Bay Logging as it's also referred to, allows users to record the current location of a vehicle or item.
Every time a user returns an iFob they will be prompted for a location. The user can use the keypad to enter letters
and numbers to make up a location description.
The location can be looked up at any time using the Lookup Facility.
NOTE: Bay Logging will only be available if the firmware of the selected system has Bay Logging enabled.
If the Bay Logging option is enabled in the firmware, it is also possible to enable / disable the option on
an iFob per iFob basis from the iFob Details window.
Removing an iFob
When a user removes an iFob from the 16bit system, the screen will display the last location of the vehicle or item for
that particular slot.
Returning an iFob
When a User returns an iFob to the 16bit system, they will be required to enter details of the vehicles current location
followed by pressing the # key.
To Next Page
Loading...
