4.14.3 TSSI BIOMETRICS VERIFICATION
To verify a user with the biometrics readers...
1. Using Traka32, configure a user with a 4 digit Primary PIN.
Please refer to the User Details section for more details.
2. Using the keypad on the Traka system, press # and enter the Primary Personal Identification Number (PIN)
followed by #.
3. Follow the on screen instructions.
NOTE: It is very important that you place your finger on the reader in the same location and in the
same manner as when you enrolled, otherwise verification will be difficult.
4. If you are having problem with the verification, please refer to the tips & tricks section.
To Next Page
Loading...
