Assa Abloy TRAKA32 - Key Handover Logging Hardware and Software Requirements; Key Handover Process

V3.5 14/08/19
UD0089
Page 552
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
Key Handover Logging Hardware and Software Requirements
As mentioned above the software version needed to operate Key Handover Logging is v02.09.0001 and above. To be
able to interface a QWERTY keyboard with your Traka cabinet you must have the following hardware...
 Traka 16bit Cabinet
 QWERTY Keyboard with PS2 connection
 QWERTY-Traka Interface Cable (see below)
Key Handover Process
To handover the key to another member of staff the user must first enable the following option in the iFob Details.
This has to be done for every iFob you wish to handover to another user.
1. Right click the desired iFob and select 'Edit iFob Details'.