Assa Abloy TRAKA32 - KK Systems K2 Converter DIP Switch Settings

V3.5 14/08/19
UD0089
Page 71
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"
KK Systems K2 Converter DIP Switch Settings
Here are the default DIP Switch settings used on the KK Systems K2 RS-232 to RS-485 converter used on the cable
connecting the PC to the RS485 network:
 K2 Off
 RXEN On
 TXEN On
 - Off
 - Off
 - Off
 OPT Off