1 x System Authoriser
Select this option two Valid User iFobs are required to be inserted into the receptor socket to activate
the ignition. A "request activation" event is logged in the first valid User iFob inserted. This must then
be removed within 5 seconds. A "Device Activated" event is logged in the second Valid User iFob to
be inserted within the next 5 seconds.
Enabled Daylight Saving (GMT)
Select this option to enable the real time clock to automatically update in accordance with U.K. GMT.
Enable Fault Logging
Check this box to enable the cost option Fault Logging on your Immobilisors. Note: - Fault Logging
must be enabled at the cabinet as well as the Immobilisor.
Disable iFob Upon Logging Fault
This option automatically enables itself when you tick the 'Enable Fault Logging' box. With this option
ticked, when a user logs a fault to the Immobilisor the iFob they used will not work again until it has
been back to the cabinet and had the events downloaded from it.
To Next Page
