11. Repeat steps 9 to 11 for each receptor strip you wish to remove the iFobs from.
NOTE: It is essential that the receptor strips are replaced in the same location from which they
were removed otherwise the system will not function correctly.
12. When you have released the iFobs replace all the receptor strips reconnecting the receptor ribbon cable.
Using a large flat bladed screwdriver secure the receptor strips in place with the fixings and spacers removed
earlier.
13. Using the Master Key, replace and lock the Cover Panels one at a time. Note the cover panels are handed.
Once the cover panels have been replaced and locked securely in place then close the door (if fitted).
14. Please contact your supplier to have your Traka System repaired and tested.
To Next Page
Loading...
