ASTRO VA-1842 - Page 199

Chapter 6 Compliance Test
183
11.1.4-4
Broadcast <Report Physical Address> as a
recording device.
Check that an external terminal is displayed on the
DUT.
Start One Touch Record of the DUT.
(Repeat this procedure with the logical address
changed to each of 1, 2, and 9.)
DUT sends <Record On> ["External Physical
Address"] [External Physical Address] with
the parameters in External Plug of the CDF.
11.1.4-5
Send <Image View On> to the DUT.
Broadcast <Active Source>.
Start One Touch Record of the DUT.
(Repeat this procedure with the logical address
changed to each of 1, 2, and 9.)
DUT sends <Record On> ["Own Source"].
11.1.4-6
Set the logical address to 1.
Select another external source.
Start One Touch Record of the DUT.
DUT does not send <Record On>.
11.1.4-7
Send <Image View On> to the DUT.
Broadcast <Active Source>.
Start One Touch Record of the DUT.
Send <Record Status> ["Recording currently
selected source"] to the DUT.
Stop the recording via the UI or remote control.
DUT sends <Record Off> after the stopping
of recording is selected.
11.1.4-8
Broadcast <Report Physical Address> from the
logical address of the recording device.
Check that an internal digital tuner is displayed on
the DUT.
Send <Record TV Screen> to the DUT.
(Repeat this procedure with the logical address
changed to each of 1, 2, and 9.)
DUT sends <Record On> ["Digital Service"]
[Digital Service Identification] with the
parameters in Digital Tuner 1 of the CDF.
11.1.4-9
Broadcast <Report Physical Address> from the
logical address of the recording device.
Send <Image View On> to the DUT.
Broadcast <Active Source>.
Send <Record TV Screen> to the DUT.
(Repeat this procedure with the logical address
changed to each of 1, 2, and 9.)
DUT sends <Record On> ["Own Source"].
11.1.4-10
Broadcast <Report Physical Address> from the
logical address of the recording device.
Check that an internal analog tuner is displayed on
the DUT.
Send <Record TV Screen> to the DUT.
(Repeat this procedure with the logical address
changed to each of 1, 2, and 9.)
DUT sends <Record On> ["Analogue
Service"] [Analogue Broadcast Type]
[Analogue Frequency] [Broadcast System]
with the parameters in Analogue tuner 1 of
the CDF.
11.1.4-11
Send <Image View On> from logical address 4 to the
DUT.
Broadcast <Active Source> from logical address 4.
Send <Record TV Screen> to the DUT.
(Repeat this procedure with the logical address
changed to each of 1, 2, and 9.)
DUT sends <Record On> ["External
Plug"] or <Record On> ["External Physical
Address"] with the appropriate parameters.