Broadcast <Report Physical Address> from the
logical address of the recording device.
Send <Image View On> from logical address 4 to the
DUT.
Broadca
st <A
c
tive
Source
> fro
m lo
gica
l add
ress 4
.
Send <Record TV Screen> to the DUT.
(Repeat this procedure with the logical address
changed to each of 1, 2, and 9.)
DUT sends <Feature Abort>["Cannot Provide
Source"] to the recording device.
Set the logical address to 1.
Check that the DUT is in the state in which entering
One Touch Record is allowed.
Start One Touch Record of the DUT.
Send <Record Status> to the DUT.
Stop the recording via the UI or remote control.
To Next Page