ASTRO VA-1842 - Page 203

Chapter 6 Compliance Test
187
11.1.5-12
Set analog timer recording via the menu.
Send <Timer Status> indicating that media is
available and timer programming has been set to the
DUT.
Clear the timer recording via the menu.
Send <Timer Cleared Status> indicating that
timer recording has been successfully cleared to the
DUT.
DUT sends <Clear Analogue Timer> with all
parameters corresponding to the timer that
was cleared.
DUT removes the timer program from that
menu.
11.1.5-13
Set external timer recording via the menu.
Send <Timer Status> indicating that media is
available and timer programming has been set to the
DUT.
Clear the timer recording via the menu.
Send <Timer Cleared Status> indicating that
timer recording has been successfully cleared to the
DUT.
DUT sends <Clear External Timer> with all
parameters corresponding to the timer that
was cleared.
DUT removes the timer program from that
menu.
11.1.5-14
Set timer recording via the menu.
Send <Timer Status> indicating that media is
available and timer programming has been set to the
DUT.
Clear the timer recording via the menu.
Send <Timer Cleared Status> indicating that
timer recording could not be cleared because there
was not a matching entry to the DUT.
DUT sends <Clear Digital Timer> with all
parameters corresponding to the timer that
could not be cleared.
DUT removes the timer program from that
menu.
11.1.5-15
Set timer recording via the menu.
Send <Timer Status> indicating that media is
available and timer programming has been set to the
DUT.
Clear the timer recording via the menu.
Send <Timer Cleared Status> indicating that
timer recording could not be cleared because there
was not a matching entry to the DUT.
DUT sends <Clear Analogue Timer> with all
parameters corresponding to the timer that
could not be cleared.
DUT removes the timer program from that
menu.
11.1.5-16
Set timer recording via the menu.
Send <Timer Status> indicating that media is
available and timer programming has been set to the
DUT.
Clear the timer recording via the menu.
Send <Timer Cleared Status> indicating that
timer recording could not be cleared because there
was not a matching entry to the DUT.
DUT sends <Clear External Timer> with all
parameters corresponding to the timer that
could not be cleared.
DUT removes the timer program from that
menu.