User's Manual 128 Document #: LTRT-42060
Mediant 2600 E-SBC
2. Click Add; the following dialog box appears:
Figure 12-11: Internal SRV Table Page
3. Configure an SRV rule according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 12-16: Internal SRV Table Parameter Descriptions
Parameter Description
Domain Name
CLI: domain-name
[Srv2Ip_InternalDomain]
Defines the host name to be translated.
The valid value is a string of up to 31 characters.
Transport Type
CLI: transport-type
[Srv2Ip_TransportType]
Defines the transport type.
[0] UDP (default)
[1] TCP
[2] TLS
DNS Name (1-3)
CLI: dns-name-1|2|3
[Srv2Ip_Dns1/2/3]
Defines the first, second or third DNS A-Record to which the host
name is translated.
Priority (1-3)
CLI: priority-1|2|3
[Srv2Ip_Priority1/2/3]
Defines the priority of the target host. A lower value means that it is
more preferred.
Weight (1-3)
CLI: weight-1|2|3
[Srv2Ip_Weight1/2/3]
Defines a relative weight for records with the same priority.
Port (1-3)
CLI: port-1|2|3
[Srv2Ip_Port1/2/3]
Defines the TCP or UDP port on which the service is to be found.
To Next Page
Loading...
