AudioCodes Mediant 2600 User Manual

Version 6.8 243 Mediant 2600 E-SBC
User's Manual 16. Quality of Experience
Parameter Description
Total Ingress Bandwidth
CLI: total-ingress-bandwidth
[BWProfile_TotalIngressBandwidth]
Defines the total (video and audio) incoming bandwidth
threshold (in Kbps).
Warning Threshold
CLI: warning-threshold
[BWProfile_WarningThreshold]
Defines the threshold (in percentage) of the bandwidth
thresholds that if exceeded is considered a Warning alarm
(Green-Yellow threshold). This applies to any of the
configured bandwidth thresholds. The Hysteresis is also
added to this Warning threshold. For example, if set to 70%
and the Hysteresis to 10%, when the current outgoing voice
traffic exceeds 80% of the configured threshold, the Yellow
state occurs and a Warning threshold alarm is sent if
'Generate Alarm' is set to Enable.
Hysteresis
CLI: hysteresis
[BWProfile_hysteresis]
Defines the bandwidth fluctuation (change) from the
bandwidth threshold value (in percentage). The threshold is
considered crossed if bandwidth exceeds the configured
threshold plus this hysteresis, and a Red state occurs. For
example, assume this parameter is set to 10% and the
configured bandwidth threshold is set to 64000 Kbps. If
current bandwidth reaches 70,400 Kbps (additional 10%),
the threshold is considered crossed.
Generate Alarm
CLI: generate-alarms
[BWProfile_GenerateAlarms]
Enables the generation of an SNMP alarm if the threshold
(with the hysteresis) is crossed.
 [0] Disable (default)
 [1] Enable
If enabled, an alarm is sent if one of the following scenarios
occurs:
 Warning threshold is exceeded (Warning severity -
Yellow threshold).
 Any configured bandwidth threshold is exceeded (Major
severity - Red threshold).

AudioCodes Mediant 2600 Specifications

General

Brand	AudioCodes
Model	Mediant 2600
Category	Controller
Language	English