User's Manual 298 Document #: LTRT-42060
Mediant 2600 E-SBC
To configure an IP Profile:
1. Open the IP Profile Settings page (Configuration tab > VoIP menu > Coders and
Profiles > IP Profile Settings).
2. Click Add; the following dialog box appears:
Figure 19-3: IP Profile Table - Add Record
3. Configure an IP Profile according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 19-4: IP Profile Settings Table Parameter Descriptions
Parameter Description
Common
Web: Index
[IpProfile_Index]
Defines an index number for the new table record.
Web: Profile Name
CLI: profile-name
[IpProfile_ProfileName]
Defines an arbitrary name to easily identify the IP Profile.
The valid value is a string of up to 20 characters.
Web: Dynamic Jitter Buffer
Minimum Delay
CLI: jitter-buffer-minimum-delay
[IpProfile_JitterBufMinDelay]
Defines the minimum delay (in msec) of the device's dynamic Jitter
Buffer.
The valid range is 0 to 150. The default delay is 10.
Notes:
For more information on the Jitter Buffer, see Dynamic Jitter
Buffer Operation on page 168.
The corresponding global parameter is DJBufMinDelay.
To Next Page
Loading...
