User's Manual 322 Document #: LTRT-42060
Mediant 2600 E-SBC
For more information, see ''Configuring SBC IP-to-IP Routing Rules'' on page 368.
4. Manipulating SIP URI user part (source and destination) of inbound and/or
outbound SIP dialog requests: You can configure rules for manipulating the SIP URI
user part (source and destination) on the inbound and/or outbound leg. For more
information, see ''SBC Manipulations'' on page 380.
5. SIP message manipulations: You can configure SIP message manipulation rules
that can add, remove, and/or modify SIP headers and parameters. For more
information, see ''Configuring SIP Message Manipulation'' on page 284.
The flowchart below illustrates the SBC process:
Figure 20-1: Routing Process
To Next Page
Loading...
