User's Manual 416 Document #: LTRT-42060
Mediant 2600 E-SBC
"Disabled by configuration and HA state": HA and ping are not configured.
"Disabled by HA state": same as above.
"Disabled by configuration”: same as above.
“Disabled by invalid configuration": invalid configuration, for example, invalid interface
name or destination address (destination address must be different than a local
address and from the redundant device's Maintenance address).
"Disabled by HA priority in use": when HA priority is used, ping mechanism is
disabled.
"Disabled by Eth groups error": when the number of Ethernet Groups in the redundant
device becomes less than in the active device, the ping mechanism is disabled.
“Failed to be activated": Internal error (failed activating the ping mechanism)
To Next Page
Loading...
