AudioCodes Mediant 2600 - Page 547

Version 6.8 547 Mediant 2600 E-SBC
User's Manual 43. Configuration Parameters Reference
Parameter Description
CLI: voice-configuration
[IniFileURL]
Defines the name of the ini file and the path to the server (IP
address or FQDN) on which it is located. The ini file can be loaded
using HTTP/HTTPS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<username>:<password>@<IP address>/<file name>
Notes:
 For this parameter to take effect, a device reset is required.
 When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently dated ini files are loaded.
 The case-sensitive string, "<MAC>" can be used in the file name
for instructing the device to replace it with the device's MAC
address. For more information, see MAC Address Automatically
Inserted in Configuration File Name on page 461.
 The maximum length of the URL address is 99 characters.
CLI: prerecorded-tones
[PrtFileURL]
Defines the name of the Prerecorded Tones (PRT) file and the path
to the server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
CLI:call-progress-tones
[CptFileURL]
Defines the name of the CPT file and the path to the server (IP
address or FQDN) on which it is located. For example:
http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
CLI: tls-root-cert
[TLSRootFileUrl]
Defines the name of the TLS trusted root certificate file and the URL
from where it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
CLI: tls-cert
[TLSCertFileUrl]
Defines the name of the TLS certificate file and the URL from where
it can be downloaded.
Note: For this parameter to take effect, a device reset is required.
CLI: tls-private-key
[TLSPkeyFileUrl]
Defines the URL for downloading a TLS private key file using the
Automatic Update facility.
[UserInfoFileURL]
Defines the name of the User Information file and the path to the
server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file
Note: The maximum length of the URL address is 99 characters.