AudioCodes Mediant 2600 - Page 555

Version 6.8 555 Mediant 2600 E-SBC
User's Manual 43. Configuration Parameters Reference
Parameter Description
[ DhcpVendorClass ]
FORMAT DhcpVendorClass_Index =
DhcpVendorClass_DhcpServerIndex,
DhcpVendorClass_VendorClassId;
[ \DhcpVendorClass ]
For a detailed description of this table, see Configuring the
Vendor Class Identifier on page 181.
DHCP Option Table
Web: DHCP Option table
CLI: configure voip > dhcp
option
[DhcpOption]
Defines additional DHCP Options that the device's DHCP
server can use to service its DHCP clients.
The format of the ini file table parameter is as follows:
[ DhcpOption ]
FORMAT DhcpOption_Index = DhcpOption_DhcpServerIndex,
DhcpOption_Option, DhcpOption_Type, DhcpOption_Value,
DhcpOption_ExpandValue;
[ \DhcpOption ]
For a detailed description of this table, see Configuring
Additional DHCP Options on page 182.
DHCP Static IP Table
Web: DHCP Static IP table
CLI: configure voip > dhcp
static-ip <index>
[DhcpStaticIP]
Defines static "reserved" IP addresses that the device's DHCP
server allocates to specific DHCP clients defined by MAC
address.
The format of the ini file table parameter is as follows:
[ DhcpStaticIP ]
FORMAT DhcpStaticIP_Index =
DhcpStaticIP_DhcpServerIndex, DhcpStaticIP_IPAddress,
DhcpStaticIP_MACAddress;
[ \DhcpStaticIP ]
For a detailed description of this table, see Configuring Static
IP Addresses for DHCP Clients on page 184.