AudioCodes Mediant 2600 User Manual

Version 6.8 557 Mediant 2600 E-SBC
User's Manual 43. Configuration Parameters Reference
Parameter Description
Month Start
EMS: Start
CLI: start
[DayLightSavingTimeStart]
can be configured using any of the following formats:
 Day of year - mm:dd:hh:mm, where:

mm denotes month

dd denotes date of the month

hh denotes hour

mm denotes minutes
For example, "05:01:08:00" denotes daylight saving starting from
May 1 at 8 A.M.
 Day of month - mm:day/wk:hh:mm, where:

mm denotes month (e.g., 04)

day denotes day of week (e.g., FRI)

wk denotes week of the month (e.g., 03)

hh denotes hour (e.g., 23)

mm denotes minutes (e.g., 10)
For example, "04:FRI/03:23:00" denotes Friday, the third week of
April, at 11 P.M. The week field can be 1-5, where 5 denotes the
last occurrence of the specified day in the specified month. For
example, "04:FRI/05:23:00" denotes the last Friday of April, at 11
P.M.
Web: End Time / Day of Month
End
EMS: End
CLI: end
[DayLightSavingTimeEnd]
Defines the date and time when daylight saving ends. For a
description of the format of this value, see the
DayLightSavingTimeStart parameter.
Web/EMS: Offset
CLI: offset
[DayLightSavingTimeOffset]
Defines the daylight saving time offset (in minutes).
The valid range is 0 to 120. The default is 60.
Note: The offset setting is applied only on the hour. For example, if
you configure this parameter at 15:42, the device applies the setting
only at 16:00.

AudioCodes Mediant 2600 Specifications

General

Brand	AudioCodes
Model	Mediant 2600
Category	Controller
Language	English