User's Manual 566 Document #: LTRT-42060
Mediant 2600 E-SBC
Parameter Description
Web: HA Network
Reachability Destination
Address
[HAPingDestination]
Defines the IP address of the destination that the device pings.
The default is 0.0.0.0.
Web: HA Network
Reachability Source
Interface Name
[HAPingSourceIfName]
Defines the device's IP network interface from where the ping is sent.
The valid value is the name of the IP interface as configured in the
'Interface Name' field of the Interface table. By default, no IP network is
defined.
HA Network Reachability
Ping Timeout
[HAPingTimeout]
Defines the timeout (in seconds) for which the ping request waits for a
reply.
The valid value is 1 to 60. The default is 1.
HA Network Reachability
Ping Retries
[HAPingRetries]
Defines the number of ping requests that the device sends after no
response is received from the destination, before the destination is
declared unavailable. For example, if you specify 2, the destination is
declared as down after three consecutive ping requests fail to evoke a
response from the destination.
The valid value is 0 to 100. The default 2.
To Next Page
Loading...
Need help?
General
