SIP User's Manual 112 Document #: LTRT-12801
MP-500 MSBG
You can also view a list of computers currently recognized by the DHCP server:
¾ To view a list of computers currently recognized by the DHCP server and
to add a new PC with a static IP address:
1. Click the DHCP Server item (Configuration tab > Data Settings menu > Services
submenu > DHCP Server page item).
2. Click the Connection List button located at the bottom of the page; the following page
appears.
Figure 3-98: Computers Recognized by DHCP Server
3. To define a new connection with a fixed IP address, click the New Static Connection
link; the following page appears:
Figure 3-99: Defining New Static Connection (IP Address)
4. Enter a host name for this connection.
5. Enter the fixed IP address that you would like to have assigned to the computer.
6. Enter the MAC address of the computer's network card.
Note: A device's fixed IP address is actually assigned to the specific network card's
(NIC) MAC address installed on the LAN computer. If you replace this
network card then you must update the device's entry in the DHCP
Connections list with the new network card's MAC address.
7. Click OK to save the settings.
To Next Page
Loading...
Need help?
General
