SIP User's Manual 170 Document #: LTRT-12801
MP-500 MSBG
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 237.
3.4.5.6.2 Configuring Supplementary Services
The 'Supplementary Services' page is used to configure parameters that are associated
with supplementary services. For a description of the parameters appearing on this page,
refer to ''Configuration Parameters Reference'' on page 291.. For an
overview on
supplementary services, refer to ''Working with Supplementary Services'' on page 515.
¾ To configure the supplementary services' parameters:
1. Open the 'Supplementary Services' page (Configuration tab > Protocol
Configuration menu > SIP Advanced Parameters submenu > Supplementary
Services page item).
Figure 3-149: Supplementary Services Page
To Next Page
Loading...
