Version 5.8 67 October 2009
SIP User's Manual 3. Web-Based Management
3.4.2.2 Configuring the Fax/Modem/CID Settings
The 'Fax/Modem/CID Settings' page is used for configuring fax, modem, and Caller ID
(CID) parameters. For a detailed description of the parameters appearing on this page,
refer to ''Configuration Parameters Reference'' on page 291.
¾ To configure the fax, modem, and CID parameters:
1. Open the 'Fax/Modem/CID Settings' page (Configuration tab > Media Settings menu
> Fax/Modem/CID Settings page item).
Figure 3-39: Fax/Modem/CID Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 237.
3.4.2.3 Configuring the RTP/RTCP Settings
The 'RTP/RTCP Settings' page allows you to configure the Real-Time Transport Protocol
(RTP) and Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed
description of the parameters appearing on this page, refer to ''Configuration Parameters
Reference'' on page 291.
To Next Page
Loading...
