AudioCodes mediapack MP-500 - Figure 3-152: Keypad Features

SIP User's Manual 174 Document #: LTRT-12801
MP-500 MSBG
¾ To configure the keypad features
1. Open the 'Keypad Features' page (Configuration tab > Protocol Configuration
menu > SIP Advanced Parameters submenu > Keypad Features page item).
Figure 3-152: Keypad Features Page
2. Configure the keypad features as required. For a description of these parameters,
refer to ''Configuration Parameters Reference'' on page 291.
3. Click the Submit button to save your
changes.
4. To save the changes to the flash memory, refer to ''Saving Configuration'' on page
237.