SIP User's Manual 200 Document #: LTRT-12801
MP-500 MSBG
Parameter Description
NPI
Select the Number Plan assigned to this entry.
 [0] Unknown = Unknown (default)
 [1] E.164 Public = E.164 Public
 [9] Private = Private
TON
Select the Type of Number assigned to this entry.
 If you selected Unknown as the NPI, you can select Unknown [0].
 If you selected Private as the NPI, you can select one of the
following:
9 [0] Unknown
9 [1] Level 2 Regional
9 [2] Level 1 Regional
9 [3] PSTN Specific
9 [4] Level 0 Regional (Local)
 If you selected E.164 Public as the NPI, you can select one of the
following:
9 [0] Unknown
9 [1] International
9 [2] National
9 [3] Network Specific
9 [4] Subscriber
9 [6] Abbreviated
Phone Context
The Phone-Context SIP URI parameter.
3.4.5.10 Routing Tables
The Routing Tables submenu allows you to configure call routing rules. This submenu
includes the following page items:
îš„ Gateway Routing General Parameters (refer to ''Configuring Routing General
Parameters'' on page 200)
îš„ Gateway Tel to IP Routing (refe
r to ''Configuring the Tel to IP Routing Table'' on page
201)
îš„ Gateway IP to Trun
k Group Routing (refer to ''Configuring the IP to Trunk Group
Routing'' on page 206)
îš„ Internal DNS
Table (refer to ''Configuring the Internal DNS Table'' on page 208)
îš„ Internal SRV
Table (refer to ''Configuring the Internal SRV Table'' on page 209)
îš„ Gateway Alternative Ro
uting (refer to ''Configuring Reasons for Alternative Routing'' on
page 210)
To Next Page
Loading...
Need help?
General
