SIP User's Manual 66 Document #: LTRT-12801
MP-500 MSBG
3.4.2.1 Configuring the Voice Settings
The 'Voice Settings' page is used for configuring various voice parameters such as voice
volume, silence suppression, and DTMF transport type. For a detailed description of the
parameters appearing on this page, refer to ''Configuration Parameters Reference'' on page
291.
¾ To configure the Voice parameters:
1. Open the 'Voice Settings' page (Configuration tab > Media Settings menu > Voice
Settings page item).
Figure 3-38: Voice Settings Page
2. Configure the Voice parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 237.
Note: Some SIP parameters override these Fax and modem parameters (refer to
the parameter IsFaxUsed, and V.152 parameters in Section ''V.152 Support''
on page 499).
To Next Page
Loading...
Need help?
General
